All Offtopic Forums

All Offtopic Forums (http://www.allofftopic.com/index.php)
-   Anything Goes (http://www.allofftopic.com/forumdisplay.php?f=2)
-   -   Important: The Chat Thread (http://www.allofftopic.com/showthread.php?t=405)

stonehenge 09-23-2009 06:18 PM

Quote:

Originally Posted by 2005_Silverado (Post 7755)
srsly, I could do exploder alt which is 110A MAX COLD rating...output decreases when hot btw...for $60-80 from vato zone....or I can get 150A HOT @ idle, with 200A max HOT for additional $90-60 :hmm: Im running constant 30A draw from LO speed, plus all other e-crap. If I get my sound system in, thats another 20A, then if I install inverter :crazy: I dont want OE alt running at 100% duty either, thats no bueno.

Beast it up :imo

Cez★ 09-23-2009 06:18 PM

o eddiez thanks for posting up for me earlier lol :) i had to turn a paper in today and she wasnt here :pow:

stonehenge 09-23-2009 06:19 PM

Okay I think I'm gonna nom the cup o noodz and then go to the server room and play croquet. Then after croqz if I'm still hungry, I'll either go get some rice from the azn place ($.54 for a box of rice and soy sauce w/ fortune cookie :jester:) or chick-fil-a has an on-campus special on wednesday where you get nuggets and frys and a drink for $3 :whoa:

2005_Silverado 09-23-2009 06:21 PM

Quote:

Originally Posted by SSierra (Post 7757)
o eddiez thanks for posting up for me earlier lol :) i had to turn a paper in today and she wasnt here :pow:

damn, did you email it to her or slide it under her office door?

Cez★ 09-23-2009 06:23 PM

Quote:

Originally Posted by Juan! (Post 7758)
Okay I think I'm gonna nom the cup o noodz and then go to the server room and play croquet. Then after croqz if I'm still hungry, I'll either go get some rice from the azn place ($.54 for a box of rice and soy sauce w/ fortune cookie :jester:) or chick-fil-a has an on-campus special on wednesday where you get nuggets and frys and a drink for $3 :whoa:

nice. we dont have that. i dont even have a chik fil a close. other than the one in the mall lol

Quote:

Originally Posted by 2005_Silverado (Post 7759)
damn, did you email it to her or slide it under her office door?

neither :blah: i was thinking of it. but i think she moves from class to class so some other teacher may have went in there or something

2005_Silverado 09-23-2009 06:24 PM

Quote:

Originally Posted by SSierra (Post 7760)
nice. we dont have that. i dont even have a chik fil a close. other than the one in the mall lol



neither :blah: i was thinking of it. but i think she moves from class to class so some other teacher may have went in there or something

email it brah....that way she knows it got done and you tried to give it to her on time :imo:

stonehenge 09-23-2009 06:25 PM

Quote:

Originally Posted by 2005_Silverado (Post 7761)
email it brah....that way she knows it got done and you tried to give it to her on time :imo:

:word: email it and mention that you have the printed copy and can drop it off somewhere if need be

SarkOzy 09-23-2009 06:25 PM

:secret:


http://www.summitracing.com/parts/FE...0/?image=large

2005_Silverado 09-23-2009 06:26 PM

355?

edit: nm...4.00 bore

SarkOzy 09-23-2009 06:27 PM

Quote:

Originally Posted by Federal Mogul
Notes: Approximate compression ratio 9.35:1 with a 64cc head.


:whoa:

SarkOzy 09-23-2009 06:28 PM

I hopefully haz extra funds available Saturday. Since I have no use for an LS1 and someone apparently does......

2005_Silverado 09-23-2009 06:30 PM

so its rebuild time? why not go .010 over?

Cez★ 09-23-2009 06:30 PM

Quote:

Originally Posted by 2005_Silverado (Post 7761)
email it brah....that way she knows it got done and you tried to give it to her on time :imo:

Quote:

Originally Posted by Juan! (Post 7762)
:word: email it and mention that you have the printed copy and can drop it off somewhere if need be

I may just do that. i sent a copy of it to my email too :hmm: after nomz :shake:

Cez★ 09-23-2009 06:31 PM

Quote:

Originally Posted by SarkOzy (Post 7766)
I hopefully haz extra funds available Saturday. Since I have no use for an LS1 and someone apparently does......

I want a ls1 :(

2005_Silverado 09-23-2009 06:33 PM

Quote:

Originally Posted by SSierra (Post 7768)
I may just do that. i sent a copy of it to my email too :hmm: after nomz :shake:

Id do that, brah....some maestros can be dicks about something like that. They have a "you couldve emailed it, I wouldve accepted it that way, you didnt, probably cuz it wasnt done, no credit, sorry" mentality.....Ask me how I know :Stupid Me:

SarkOzy 09-23-2009 06:35 PM

Quote:

Originally Posted by 2005_Silverado (Post 7767)
so its rebuild time? why not go .010 over?


:knocksonwood: More like side project time. I'm pulling my spare trans apart Saturday to get the metal shavings out of it, and I need something to occupy my time lol. I can probably score a POS used block/engine from around here, then tear it down and rebuild it. Nothing fancy, I'll probably get a set of .010 over rings and cut them to size instead of boring the block.....I can use my hone to get it smooth. Basically have a spare engine to go along with my trans. Remember I've put right at or maybe even over 100K on this engine. And it was a reman. :blah:

Manbearpig 09-23-2009 06:37 PM

Quote:

Originally Posted by SarkOzy (Post 7763)

lol @ tpi gaskets in the picture

Cez★ 09-23-2009 06:38 PM

Quote:

Originally Posted by 2005_Silverado (Post 7770)
Id do that, brah....some maestros can be dicks about something like that. They have a "you couldve emailed it, I wouldve accepted it that way, you didnt, probably cuz it wasnt done, no credit, sorry" mentality.....Ask me how I know :Stupid Me:

:hmm: she probably would say that. im bout to send it

2005_Silverado 09-23-2009 06:41 PM

Quote:

Originally Posted by SarkOzy (Post 7771)
:knocksonwood: More like side project time. I'm pulling my spare trans apart Saturday to get the metal shavings out of it, and I need something to occupy my time lol. I can probably score a POS used block/engine from around here, then tear it down and rebuild it. Nothing fancy, I'll probably get a set of .010 over rings and cut them to size instead of boring the block.....I can use my hone to get it smooth. Basically have a spare engine to go along with my trans. Remember I've put right at or maybe even over 100K on this engine. And it was a reman. :blah:

nice...That rebuild kit would net a nice lil short-block, ready to go in in case ur reman ever blows up. I remember doing my Raptor's piston...went with a wiseco 11:1...bitch had a 3.9567 bore :blah: came out to 666cc :devil:

Cez★ 09-23-2009 06:44 PM

2 more days til i may get a new phone :pepper:

SarkOzy 09-23-2009 06:45 PM

Quote:

Originally Posted by Manbearpig (Post 7772)
lol @ tpi gaskets in the picture

:word:

Quote:

Originally Posted by 2005_Silverado (Post 7774)
nice...That rebuild kit would net a nice lil short-block, ready to go in in case ur reman ever blows up. I remember doing my Raptor's piston...went with a wiseco 11:1...bitch had a 3.9567 bore :blah: came out to 666cc :devil:

:uhoh: Yea just good insurance. I can already do a trans swap in 3 hours by myself. lol

2005_Silverado 09-23-2009 06:45 PM

Quote:

Originally Posted by SSierra (Post 7773)
:hmm: she probably would say that. im bout to send it

:shake:

Quote:

Originally Posted by SSierra (Post 7775)
2 more days til i may get a new phone :pepper:

cual?

Cez★ 09-23-2009 06:46 PM

htc TP2 :bowtie:

2005_Silverado 09-23-2009 06:46 PM

Quote:

Originally Posted by SarkOzy (Post 7776)
:word:



:uhoh: Yea just good insurance. I can already do a trans swap in 3 hours by myself. lol

no francois help, unless u want disinfected starter :shrug:

Manbearpig 09-23-2009 06:46 PM

Quote:

Originally Posted by SSierra (Post 7775)
2 more days til i may get a new phone :pepper:

Might be picking me up one maybe next week or the week after. :rockit:


All times are GMT +1. The time now is 07:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.