Important: The Chat Thread 2

[BillyJeanKing]

saw that

those kids dicks are bigger than them sausages

[theholycow]

Cez, computer desk for $30 http://www.fatwallet.com/forums/hot-deals/1433389

Looks like piece of shit, dunno why it has good ratings...based on photo I'd much rather have a door and some cinderblocks.

[stonehenge]

description says "2 drawers"

but where is drawer

---------- Post added at 08:36 AM ---------- Previous post was at 07:16 AM ----------

Kinda want a new backpack. I bring one to work every day with various goodies (flash drives, lunch, water bottle, coffee mug, granola bars, tablet, maybe a laptop or 3ds/Vita, phone charger, etc.).

I have a Targus right now that I've had for years and it's been great but the material on the bottom is falling apart and it's had coffee and whatnot spilled on it repeatedly. Kinda want new backpack when I start the new jerb.

Any of you have bamf backpacks that you recommend? The only real requirements I have are that it has a few different small compartments and at least one large one. And I need a fairly deep "bottle pocket" on the outside (usually mesh).

So many choices on Amazon

Also, would prefer to spend under $50 but if it's one that you KNOW is good then maybe can haz splurge. Considering the number of years I've kept my current one and how much I use it, it would be a worthwhile investment.

[theholycow]

Originally Posted by stonehenge

but where is drawer

Kinda want a new backpack. I bring one to work every day with various goodies (flash drives, lunch, water bottle, coffee mug, granola bars, tablet, maybe a laptop or 3ds/Vita, phone charger, etc.).

I have a Targus right now that I've had for years and it's been great but the material on the bottom is falling apart and it's had coffee and whatnot spilled on it repeatedly. Kinda want new backpack when I start the new jerb.

My backpack is at least 10 years old, probably closer to 15. It's wearing out. The upper front pocket has worn a hole through that drops stuff into the main compartment occasionally. A couple zippers are starting to malfunction.

[stonehenge]

Mine doesn't have holes and the zippers still work. I don't NEED a new one but dfw. It's stained and the rubber coating on the bottom is falling apart so its probably only a matter of time before a hole wears through it.

[Cez★]

Originally Posted by theholycow

Cez, computer desk for $30 http://www.fatwallet.com/forums/hot-deals/1433389

Looks like piece of shit, dunno why it has good ratings...based on photo I'd much rather have a door and some cinderblocks.

looks puny. doesnt look any bigger than the one i already have

Originally Posted by stonehenge

description says "2 drawers"

but where is drawer

---------- Post added at 08:36 AM ---------- Previous post was at 07:16 AM ----------

Kinda want a new backpack. I bring one to work every day with various goodies (flash drives, lunch, water bottle, coffee mug, granola bars, tablet, maybe a laptop or 3ds/Vita, phone charger, etc.).

I have a Targus right now that I've had for years and it's been great but the material on the bottom is falling apart and it's had coffee and whatnot spilled on it repeatedly. Kinda want new backpack when I start the new jerb.

Any of you have bamf backpacks that you recommend? The only real requirements I have are that it has a few different small compartments and at least one large one. And I need a fairly deep "bottle pocket" on the outside (usually mesh).

So many choices on Amazon

Also, would prefer to spend under $50 but if it's one that you KNOW is good then maybe can haz splurge. Considering the number of years I've kept my current one and how much I use it, it would be a worthwhile investment.

ive had this jansport bootleg since highschool. shit still holding on. but only has a big pocket and a smaller one in front

[stonehenge]

Want a laptop pocket for protection. Jansports are legit tho.

[shootermcgavin003]

i haz targus and some att one tiff got free.

[M.B Co]

I likey co. Springs

[Cez★]

---------- Post added at 06:31 PM ---------- Previous post was at 06:27 PM ----------

http://www.washingtonpost.com/news/a...ess/?tid=sm_tw


what the fuck are these bums crying about. nasty motherfuckers get a free shower. fuckin scummy druggies. "inhumane" motherfuckers please.

---------- Post added at 06:58 PM ---------- Previous post was at 06:31 PM ----------

so i think ill bite the bullet tomorrow and go pick up my wood materials for desk.

now how do i go about reinforcing the bottom to hold up stuff?

because i was making an L desk, i was gonna put 4 legs, 2 on each side and 1 at the corner. do i need cross bracings of sorts?

[shootermcgavin003]

i would build a rectangle frame under it then put the studs in the four corners attach board on top

[Cez★]

need stud gun? no nails?

[theholycow]

Connect legs with 2x4's and lay plywood on top. If triangle desk, should be small enough not to need any cross braces, just the perimeter 2x4's. Nails, screws, whatever, doesn't really matter.

[stonehenge]

Wait, if you're making an L you'll need 5 legs. Two at each end and one in the back corner. Underneath you put two rectangles together.

---------- Post added at 05:59 PM ---------- Previous post was at 05:59 PM ----------

Oh it's a triangle? Nvm

[Cez★]

triangle i was kinda set on the L desk. but i wonder if a triangle desk will give me enough room. that would be easier too tho

[Chevrolet Fanatic]

Originally Posted by stonehenge

Want a laptop pocket for protection. Jansports are legit tho.

Case logic has some of the best stuff I've seen, been happy with everything I've ever bought from them.

[shootermcgavin003]

Can do 4 legs on l

Sent from my SAMSUNG-SM-N910A using Tapatalk

---------- Post added at 09:44 PM ---------- Previous post was at 09:43 PM ----------

5 be better though

Sent from my SAMSUNG-SM-N910A using Tapatalk

---------- Post added at 09:45 PM ---------- Previous post was at 09:44 PM ----------

Use screws

Sent from my SAMSUNG-SM-N910A using Tapatalk

[Cez★]

screws? dont that mean i have to drill holes then the screws?

[theholycow]

Depends on the wood. Some woods will take screws without pilot holes, some risk cracking if you're not good at it.

[Cez★]

mhmmm, well i got drill bits. need to find a drill tho. and need screws rofl.


so i buy wood and screws. what size screws?

[stonehenge]

Originally Posted by Chevrolet Fanatic

Case logic has some of the best stuff I've seen, been happy with everything I've ever bought from them.

Interesting. The one I was liking most so far is a Case Logic.

Originally Posted by theholycow

Depends on the wood. Some woods will take screws without pilot holes, some risk cracking if you're not good at it.

[shootermcgavin003]

About 2 in

Sent from my SAMSUNG-SM-N910A using Tapatalk

[Cez★]

k 2 inches long. i assume i get smallest diameter?

[shootermcgavin003]

I would get something like a 8 or 6 diameter

Sent from my SAMSUNG-SM-N910A using Tapatalk

[Cez★]

alright then


fak. gonna has to drive narcoburb to lowes

---------- Post added at 10:37 PM ---------- Previous post was at 10:11 PM ----------

also,


how do i screw top board to the legs?

from the top onto the bottom? would the leg not split if i do that?