And yet another snag..
According to Kenwood, we were not putting the correct addresses in the repeater. It states that 1 entry in the screen I posted above has to be the local IP address. I assumed this would be the internal address. But, they said the subnet and gateway HAVE to be the same at both locations. So, what I did is had him program the 1st useable static IP address ISP assigned in slot 1, and the 2nd in slot 2. Now I have to call in and have the ip address at site 2 changed to the 2nd usable static address they assigned. I think...
Sent from my SAMSUNG S7.
__________________
|